bing tracking image
  1. Trailer Jack
  2. Dutton-Lainson
  3. Boat Trailer
  4. Utility Trailer
  5. A-Frame Jacks
  6. Manual Jack
Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel - Sidewind - 15" Lift - 1,000 lbs
Dutton-Lainson

Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel - Sidewind - 15" Lift - 1,000 lbs

Part Number: DL74MR
$131.41
Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

A-frame trailer jack is ideal for boat trailers and recreational trailers. 6" Caster can be swapped for a foot plate (sold separately) for more stability. Rust-resistant premium finish is 5 times stronger than traditional zinc. Made in the USA. Great Prices for the best trailer jack from Dutton-Lainson. Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel - Sidewind - 15" Lift - 1,000 lbs part number DL74MR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (71)
  • Q & A (0)
  • Photos

Dutton-Lainson Trailer Jack - DL74MR

Highlights

  • 1,000-Lb Lift Strength: Handles typical boat and utility trailer tongue weights with steady support.
  • 15" Lift Range: Raises and lowers smoothly for easy hitching and leveling on varied terrain.
  • Rough-Use Ready: TUFFPLATE zinc finish resists rust and corrosion for up to 500 hours of salt spray.
  • Smooth Rolling Wheel: 6" caster moves easily by hand and can be swapped for a foot plate when needed.
  • Quick Bolt-On Fit: Mounts through the existing A-frame coupler hole with included hardware.
  • Comfort Crank: Sidewind handle with cushioned grip keeps lifting effortless and controlled.
Made in USA

Features to know about

Smooth Lifting and Easy Maneuvering: 15" Lift with 6" Caster Wheel

Hookups, parking, and shifting your trailer by hand get a lot simpler with the smooth-cranking sidewind handle and 15" of lift. The built-in 6" caster wheel rolls easily for small moves or alignment, and it can be swapped out for a foot plate (sold separately) when you want more stability on soft ground. The cushioned grip makes cranking comfortable, and the handle clears tool boxes and winch posts without getting in the way.

Built to Resist Salt and Spray: TUFFPLATE Zinc Finish with 500-Hour Rating

Saltwater and road grime won’t eat through this jack. The premium TUFFPLATE zinc finish uses three layers—a zinc base, chromate layer, and sealed top coat—to block corrosion. It held up for nearly 500 hours in salt-spray testing, which is about five times stronger than standard zinc and outlasts typical powder coat. That means less worry about rusting hardware or frozen parts, even after repeated dunking or coastal use.

Rusted trailer jack attached to a trailer frame showing extensive corrosion, used to illustrate the benefits of Dutton-Lainson TUFFPLATE rust-resistant coating.

Reliable Support for Light and Mid-Size Trailers: 1,000-lb Lift Capacity

With a 1,000-lb capacity, this A-frame jack easily handles typical tongue weights for small campers, boats, or utility trailers. The bracket height ranges from 8-1/2" retracted to 23-1/2" extended, so it gives you plenty of lift to level or hitch up. Both the inner and outer tubes—1-3/4" and 2" in diameter—are made from durable steel for steady support without flexing under load.

Quick Retrofit and Solid Fit: 2" Outer Tube with Bolt-On Hardware

Replacing a worn-out or hard-to-find factory jack is straightforward thanks to the 2" outer diameter and included bolt-on hardware. It drops into the existing hole on most standard A-frame couplers without drilling new holes. Installation takes just a few minutes, and once bolted up, the jack sits tight and turns smoothly.

Ready for Years of Use: Durable Steel Construction and Simple Design

This jack’s all-steel build and sealed finish mean it’s made to last. There’s no complicated mechanism to maintain, just a dependable sidewind that works every time you need to lift, lower, or move your trailer. Whether it’s seeing weekly boat launches or sitting out the winter, it stays solid and easy to operate season after season.

Specs

Weight and Capacity

  • Lift capacity: 1,000 lbs

Dimensions

  • Bracket height (retracted): 8-1/2"
  • Bracket height (extended): 23-1/2"
  • Lift: 15"
  • Clearance: 16-1/2" from top of trailer frame to top of jack
  • Inner tube diameter: 1-3/4"
  • Outer tube diameter: 2"
  • Wheel dimensions: 6" diameter x 3-5/16" wide

Warranty

  • Limited warranty: 2-year

22531 Dutton-Lainson A-Frame Trailer Jack w/ Caster Wheel - Sidewind - 15" Travel - 1,000 lbs

Alternate Part Number: 6418





Customer Satisfaction Score:

Ratings & Reviews

4.9

71 reviews
Review sort icon
A-frame trailer jack is ideal for boat trailers and recreational trailers. 6" Caster can be swapped for a foot plate (sold separately) for more stability. Rust-resistant premium finish is 5 times stronger than traditional zinc. Made in the USA.

by:



by:



by:



by:



by:



by:



by:



by:



by:

Does whats its supposed to.



by:

Exactly what I was looking for. A jack that has a 2-inch outer diameter.



by:

Great service fast shipping



by:

Quality part in a reasonable time frame



by:

Easy install....hope it resists rust and corrosion.



by:

The jack is great. It was hard to find because it is for an older model pop up camper but Kurt was super helpful and helped me find the right one. This company offers exceptional customer sevice. Incredible attitudes all around. It’s like Disney world but for trailers. Never seen anything like it. I won’t go anywhere else for trailer needs.



by:

I would only say that the retracted "up" position of the jack does NOT have enough ground clearance , absent the wheel, to guarantee there is NO contact with concrete when entering/exiting a sloped concrete driveway.



by:

The trailer jack for Our old (1996) tent trailer was received in a timely manner in good condition. It was easy to install and appears to work well. Very easy to operate and good instructions were included.



by:

Even though the shipping box was all but destroyed, all parts arrived and installation was easy and practical.



by:

Good quality Jack.



by:

This jack is the perfect fit for our trailer with a 2" hole. etrailer.com had all the details listed (not like other sites) so that I could purchase with confidence. Strong jack with lock on (pin) wheel. etrailer.com is my new go to site for trailer needs.



by:

Well constructed and easy to install



by:

It was a perfect fit on a 20 year old trailer. The one it replaced was a disaster, and now I don't have to fight it any more. Solid replacement. Would recommend.



by:

2” in diameter. Perfect!



by:

Solid product, has it a year with no pr oblems.



by:

This is great! After 9 months of searching for a replacement jack (and 3 jack circumference sizes that did not work)for our 2004 Viking Epic popup camper, this one fits! Its perfect! Thank you! Very happy!



by:

Installed on Sure track trailer. Good j ob.


25
25

See what our Experts say about this Dutton-Lainson Trailer Jack

  • 2 inch Outer Diameter A-Frame Trailer Jack Recommendation
    I have good news, our trailer jack that has a 2 inch outer diameter part # DL74MR would fit and work well. While it has a 1,000 lb weight capacity that does not mean 1,000 lb total trailer weight capacity. That capacity is the tongue weight capacity which is normally 10-15 percent of the total trailer weight. So your trailer would be looking at around 150 lbs of tongue weight which would be no problem for this at all.
    view full answer...
  • Looking for A-Frame Trailer Jack with Wheel Caster
    Hey Lloyd, there isn't a wheel option made for the etrailer Sidewind Trailer Jack w/ Drill Adapter # e88GV but we do have an a-frame jack that does have a wheel caster like you are looking for with the Dutton Lainson part # DL74MR. This will work great as a new jack that will allow you to move the trailer around as needed. What kind of trailer do you have?
    view full answer...
  • Measurement From The Bottom Of The Wheel To The Bottom Of The Bracket On The DL74MR Jack
    Hi Robert! The Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel - Sidewind - 15" Lift - 1,000 lbs # DL74MR will measure 16-13/16" (roughly) from the bottom of the wheel to the bottom of the mounting bracket when fully collapsed. When fully extended, it will measure 31-13/16" (roughly). I say roughly for both of those as there may be a little bit of wiggle room in those measurements as I had to do the measurements for the wheel separately. We don't have the jack on hand at the moment,...
    view full answer...
  • A-Frame Jack with Wheel Caster Recommendation for Shasta Airflyte
    Hey Diana, there isn't a confirmed caster wheel available for the # e38AV but I do have a similar solution that will work. The etrailer jack is designed to use its included foot/SnapPad. If you need a jack that allows the trailer to be rolled around, I'd recommend switching to a jack specifically designed with a caster wheel like the Dutton Lainson part # DL74MR which will work great for you. What does your Shasta weigh? It looks pretty awesome!
    view full answer...
  • Availability Of A-Frame Trailer jack With 1.5" Outside Diameter Tube
    Hello J, thanks for reaching out. I went thru all of the A-frame jacks we carry and I am sorry to say we do not offer one with a 1.5" outer diameter tube. They are virtually all 2-1/4" OD tubes. The only exception is the Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel # DL74MR which has a 2" OD tube. Honestly, you might have a really hard time finding a jack with a 1.5" tube. It just isn't common anymore. If you are needing a new jack, I recommend having a new support plate welded on...
    view full answer...
  • Is There an A-Frame Jack Wheel Designed for a 1.5 inch Diameter Jack Leg
    Hey Craig, yeah a 1.5 inch jack leg is going to be pretty small and hard to find anything that fits as most everything now is 2-1/4 inch. Do you see a brand on the jack by chance? That might be best place to start checking. For an a-frame jack with a wheel that you could use to replace what you have the Dutton Lainson part # DL74MR would be a really great option.
    view full answer...
  • What is the Mounting Hole Spacing of the Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel DL74MR?
    Hey Randall. The Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel item # DL74MR has a 3" on center bolt pattern, which is standard for an A-Frame jack. The outer tube diameter is 2". It has 15" of travel, a 1,000 lbs weight capacity, and a 6" caster wheel. What kind of trailer do you have? You can add this information, along with any other questions you have, where it says Add Comment.
    view full answer...
  • Solution for Needing Trailer Jack with Outer Tube Diameter of 1-7/8 inch
    I have a solution for you, however we do not have a trailer jack available that features an outer tube diameter of 1-7/8 inches. They just aren't around anymore. The best recommendation I have is to simply install a new bottom support plate like the Bulldog Jack Support Plate # BD003135. The new plate can be either welded or bolted onto the trailer and features a 2-1/3 inch diameter hole for jack tubes, making it much more universal in terms of finding a compatible trailer jack. Then...
    view full answer...
  • Weight Distribution for Trailer With Side Mounted Trailer Jack
    It may be possible to use a WDH like the Equal-i-zer Weight Distribution System # EQ37100ET with your trailer, but it will depend on the location of that jockey wheel. The brackets for this system mount 27-32" back from the center of the coupler with the overall length of the spring bars being 36". If your jack is clear or can be moved so it is out of the way then you could use this system or others like it. The other possibility is to mount that jack on the inside of the frame if it...
    view full answer...
  • Dutton-Lainson Trailer Jacks That Are Made In The USA
    We carry the Dutton-Lainson line of jacks that are made in the USA. Here are a few of the different jacks that we carry from them. A-Frame Jacks 1,000LB A-Frame Trailer Jack with Caster Wheel # DL74MR 5,000LB A-Frame Trailer Jack # DL22772 Side Mount Jacks 1,500LB Pull Pin, Easy Swivel Trailer Jack with 6" Dual Wheels # DL22580 2,000LB Drop Leg Trailer Jack with Footplate # DL97MR 2,000LB Pipe Mount Swivel Style Trailer Jack with Foot # DL22682
    view full answer...
  • Solution for Adding Wheel to Jack on 2002 Rockwood Freedom 1980
    I do have a solution, but all of our wheels fit a 2" diameter tube. With a 1.7" measurement you won't find anything that fits your current jack. The only way to add a wheel will be to get a new jack like the A-Frame Trailer Jack with Caster Wheel # DL74MR. As far as I can tell, you have an A-frame jack right now so this will work as a replacement. It has 15" of travel and a 1,000 lb weight capacity which should be plenty for your camper.
    view full answer...
  • Looking for Replacement Jack for 2019 Ranger 2510 Boat Trailer
    Hey Phillip, I pulled up several pictures of your 2019 Ranger 2510 boat trailer and it appears to have a Dutton Lainson jack with caster wheel like the # DL74MR. This would be a great option for an exact replacement. If what you have is different though let me know and I'll see what you would need.
    view full answer...
  • Replacement Option For Pop-Up Camper
    There isn't a replacement wheel we can offer for an AL-KO jack; the best we can do is a new jack, and I assume that is an A-frame jack. For one with a wheel use A-Frame Trailer Jack with Caster Wheel # DL74MR, which is a 1,000 lb capacity jack. If that's not right I have added a link to our entire selection of jacks for you.
    view full answer...
  • Looking for Replacement Jack Foot Plate for Dutton Lainson Jack DL74MR
    Hey Jessica, yes the replacement steel foot part # DL22541 that you referenced is correct foot plate replacement for the Dutton Lainson jack part # DL74MR that you referenced. Do you have the jack already?
    view full answer...

Do you have a question about this Trailer Jack?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alex H
Updated by:
Alex H
Employee Ryan F
Updated by:
Ryan F
Employee Matthew S
Written by:
Matthew S
Employee Daron K
Edited by:
Daron K
Employee Aidan B
Installed by:
Aidan B
Employee John S
Video by:
John S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924